Mercedes-Benz E250 BlueTEC – Click above for high-res image gallery
Mercedes-Benz brought the new E250 BlueTEC concept sedan to the New York Auto Show today, showing the type of clean diesel sedan that could follow in the wake of last year's BlueTEC SUV mini-fleet. The E250 BlueTEC boasts a 2.2-liter four-cylinder diesel engine with SCR (Selective Catalytic Reduction) exhaust technology mated to a seven-speed automatic transmission. The small diesel motor produces big power: 369 lb-ft of torque at 1600-1800 rpm. Part of the conceptual clean diesel fun comes from a 25-liter urea solution (AdBlue) tank that sits in the exhaust stream and reduces NOx emissions, which helps make the car 50-state legal. This is key, since the E250 was created just for us Yankees, MB says. The concept would also meet Europe's strict EU6 emissions standards, which won't be enacted until the later part of 2014. Using BlueTEC in the E250 would probably get the car a 28 mpg city and 39 mpg highway rating from the EPA, Mercedes estimates. Check out the press release after the jump and live, high-res images in our gallery below.
Related GalleryNew York 2009: Mercedes-Benz E 250 BlueTEC
Related GalleryMercedes-Benz E 250 BlueTEC
Photos copyright ©2009 Sebastian Blanco / Weblogs, Inc.
Cleanest diesel technology, excellent fuel economy, great fun to drive
- E250 BlueTEC
- Unique combination of a highly efficient four-cylinder diesel engine and SCR exhaust technology
- 50-State Bin 5 compliance
- Refined power delivery makes concept car great fun to drive
- Technical data
EU 5 All new vehicles after 09/01/2009 EU 6 / All new vehicles after 09/01/2014
CO (g/km): 0.50 / 0.50
NOx (g/km): 0.18 / 0.08
HC + NOx (g/km): 0.23 / 0.17
Particulate emissions (g/km): 0.005 / 0.005
Group M1 - passenger vehicles with no more than eight seats plus driver. Max. total permissible weight 3,500kg. Test procedure NEDC 2000.
For the E250 BlueTEC, the modern 2.2 liter four-cylinder CDI engine underwent a detailed redevelopment program in order to further reduce the internal raw emissions generated by the engine and to fulfill the legislative requirements for on-board diagnostics (OBD), as well as other factors. The power unit hardware incorporates features from the series production engines, such as four-valve technology, fourth-generation common-rail piezo direct injection, 2-stage turbocharger and exhaust gas recirculation. A highly sensitive electronic engine control system reacts precisely across the full range of operating conditions to optimize the combustion process. The exhaust gas treatment system incorporates an oxidation catalytic converter mounted close to the engine, as well as a diesel particulate filter, which is located at the rear bulkhead in order to shorten its regeneration time.
At the heart of the BlueTEC system are two SCR catalytic converters (Selective Catalytic Reduction) with an "AdBlue®" injector positioned upstream. "AdBlue®" is a synthetic, aqueous urea solution that enables the nitrogen oxide (NOx) to be converted into harmless nitrogen gas in the SCR catalytic converters. The monitoring and diagnosis of the sophisticated exhaust gas treatment process is handled by several sensors, including a differential pressure sensor, a Lambda probe plus NOx and temperature sensors.
For on-board storage of the "AdBlue®" solution, the E250 BlueTEC has a 25 liter tank equipped with a membrane pump, valve, pressure and temperature sensors. The tank volume is sufficient for the duration of a full service interval and is refilled as part of the regular maintenance schedule. The "AdBlue®" tank is integrated into the spare wheel well in the trunk.
E250 BlueTEC combines environmental awareness, driving fun and comfort The combination of the powerful four-cylinder engine with SCR technology makes a convincing argument not only in terms of fuel economy and emissions, but also with impressive performance and the associated fun factor. Thanks to a pair of Lanchester balancing shafts, the concept vehicle's powertrain boasts the exceptionally smooth characteristics expected of a Mercedes-Benz.
Summary technical data for the E250 BlueTEC:
Engine/cylinders - Diesel/I4
Transmission - 7-speed automatic
Displacement - 2143 cm³
Nominal power output - 204 hp
Nominal torque - 369 lb-ft at 1600-1800 r/min
U.S. fuel economy* City Highway - 28 mpg 39 mpg
U.S. emissions compliance - Bin 5
In Europe, this BlueTEC technology is available in a series production model starting fall 2009 with the E350 BlueTEC. Under its hood is a V6 diesel engine with 211 hp and 540 Nm of torque. This means that Mercedes-Benz will very soon offer a series production passenger vehicle that complies with the EU6 emissions standard not scheduled for implementation until 2014.