Audi R18 E-Tron Quattro

Technically speaking, Audi's R18 E-Tron Quattro is quite technical. The German automaker says the diesel-hybrid is the "most complex race car" it's ever created. And we'll take their word for it.

The Audi, which pairs a V6 turbodiesel powering the rear wheels with two electric motors, is all about connectivity, giving the car's crew the opportunity to constantly monitor the vehicle while it's racing. The car sends in a host of data each lap to the crew's computers, and the vehicle's telemetry system constantly keeps tabs on things like hybrid energy levels, cockpit temperature and boost-pressure levels. In all, the amount of data parameters is more than 100 times greater than in 1989, when Audi first tested a race car equipped with automatic data transmission capabilities.

Audi first released specs on the updated version of the R18 E-Tron Quattro late last year, trumpeting the vehicle's advantages in competing in the LMP1 class of the 2014 World Endurance Championship (WEC). Audi made the car a little narrower and a little taller and it complies with a new WEC regulation requiring the front end set off by a new wing. Take a look at Audi's most recent press release below.
Related GalleryAudi R18 E-Tron Quattro
Audi R18 E-Tron QuattroAudi R18 E-Tron QuattroAudi R18 E-Tron QuattroAudi R18 E-Tron Quattro
Show full PR text
AUDI R18 E-TRON QUATTRO WITH COMPLEX ELECTRONIC ARCHITECTURE

• Telemetry connection between race car and pit lane
• Permanent acquisition of far more than 1,000 parameters
• Various electronic control units interlinked by a multitude of CAN Bus systems

Ingolstadt, May 5, 2014 – The Audi R18 e-tron quattro is the most complex race car created in Ingolstadt and Neckarsulm to date. This not only applies to the mechanics. The electronics of the most recent LMP1 race car with the four rings is more sophisticated than ever before.

The age of electronic data transmission from the race car on track began for Audi in 1989. At that time, an Audi 90 quattro in the IMSA GTO series radioed eight parameters to the garage where engine speeds and a few pressures and temperatures were plotted on printouts – a tiny step from today's perspective, but one that provided important insights at the time.

Today, an Audi R18 e-tron quattro on more than a thousand channels, in cycles that in some cases only amount to milliseconds, generates data of crucial importance to a staff of engineers at Audi Sport. At Le Mans, the engineers constantly monitor their race cars for 24 hours. Whether it concerns the functionality of the systems, compliance with the regulations or information that is important for strategic reasons, the race car – similar to a medical EKG system – continually diagnoses its condition and reports it to the team garage.

For this purpose, the LMP1 sports car is equipped with an array of CAN Bus systems which interlink a wide range of electronic control units (ECUs). Sophisticated sensors measure various parameters, such as suspension and acceleration data, temperatures and pressures, or information in the area of energy management, to generate a database for the ECUs. The R18 e-tron quattro has a master system control unit that is primarily responsible for engine and hybrid control and additionally communicates with the other control units in the race car – such as the ECUs for the transmission, clutch actuators, windshield wipers and the laser beam headlights.

The race car has a direct online connection to the computers in the team garage. It is used for high-speed data transmission in real time for operating conditions, such as temperatures, that do not require a high transfer rate. This makes it possible to effectively transfer limited data volumes for a general assessment of the car's condition. In contrast, the sports car gathers detailed data on each race lap and transmits it via a burst signal when the car drives past the pit lane. Data volumes of more than 20 megabytes are generated per lap, depending on the measurement configuration – equating to more than 10,000 A4 size pages.

Bi-directional data transmission is prohibited. Data may be transmitted from the car to the pits, but not vice versa. Radio communications with the race driver in the car are the only possibility which the team has to influence the car. If there is a need for action based on the engineers' data analysis this information – such as brake balance, engine control or hybrid system settings – is communicated to the driver by radio. If necessary, alternative program versions stored in the car may be used.

In addition, there is a telemetry system for the officials of the FIA (Fédération Internationale de l'Automobile), which together with the ACO (Automobile Club de l'Ouest) monitors compliance with the regulations: Is the hybrid system within the prescribed amounts of energy? Is the energy consumption of the race car within the prescribed range? Are the boost pressure parameters correct? Does the cockpit temperature remain within the permissible limits?

In addition, the FIA uses a GPS system. This year, the FIA has begun to use this system for measuring whether or not a race driver complies with the speed limit in critical situations, such as caution periods at the scene of an accident. Activities of the marshals (in marshaling areas to secure accident scenes, for example) are also displayed in the cockpit. This provides the driver with assistance that enhances the safety of all the participants. Furthermore, the position of the race car can be tracked on a map of the circuit in real time. Consequently, a modern LMP1 race car is constantly and comprehensively connected with the team and with race control.